Jabsco 36600-0000 Marine PAR Belt Drive Bilge Pump (475-GPH, 12-Volt, 15-Amp, 3/4")

36600 Diaphragm Bilge Pump475 usgph open flow outputSelf-priming up to 10ft vertical lift allows mounting above wet bilgesDiaphragm design allows extended dry runningComplete with Pumpgard™ strainerPermanently Lubricated Ball Bearings on Shaft and Connecting Rod Product : JABSCO 36600 BELT DRIVEN DIAPHRAGM BILGE PUMP 8 GPM 12V Manufacturer : JABSCO Manufacturer Part No : 36600-0000 UPC : 671880031899

The Jabsco 36600-0000 Marine PAR Belt Drive Bilge Pump is self priming up to 10 feet of vertical lift, allows mounting above wet bilges. Featuring a 475 gallons per hour (1800 liters per hour) open flow output and quiet operation, the diaphragm design allows extended dry running. This pump also features a built-in hydraulic pulsation dampener and comes complete with a pumpgard strainer.

Jabsco's diaphragm bilge pumps are self-priming, so they can be mounted above and outside of harsh bilge environments. Because they are mounted remotely, the intake hose can be routed to the lowest point of the bilge regardless of space limitations. They are supplied with an in-line strainer to prevent damaging debris from entering pump. The reliable diaphragm design is not damaged by dry running.

Features:

• Self-Priming
• Diaphragm Design Allows Dry Running
• Quiet Operation
• Permanently Lubricated Ball Bearings on Shaft and Connecting Rod
• Large Vibration Absorbing Pads
• Corrosion Resistant Materials Throughout for Sea Water Service
• Built-in Hydraulic Pulsation Dampener
• Meets USCG Regulation 183.410 and ISO 8846 Marine for Ignition Protection

/

Specifications:

• Body: Plastic
• Port Type: 3/4" Hose barb
• Voltage: 12
• Weight: 11 pounds / 5 kg
• Flow rate: Nominal 36 Liters/min (8 gallons/min)
• Self-priming from dry up to 2.4m (7.8 feet)

About Jabsco
Jabsco is a worldwide leading manufacturer of products for the leisure marine market including water system, engine cooling pumps, searchlights, and marine waste systems. Jabsco also offers industrial pumps for hygienic applications, fluid transfer in chemical processing, laboratory, paint processing, plating, and construction. Jabsco is part of ITT's Marine & Leisure family of companies, which includes Rule, Flojet, HydroAir, Danforth, LVM, and Sudbury. This synergistic alliance joined the strengths, expertise, and resources of these companies, thereby guaranteeing the accelerated development and introduction of innovative and reliable products.